偷窥自拍第一页,国产精品第一,国产2021精品视频免费播放,狠狠五月深爱婷婷网免费

客戶榮譽
kehury
技術文章
  • 邢臺紅外熱像儀 FLIR A310 ex
  • 工業企業廠界噪聲標準
  • PH電極使用注意事項
  • 數顯電流表應用原理
  • 頻率計類儀器自動校準系統中測試界面的設計
  • 電源常規功能測試
  • 選購里氏硬度計的相關知識
  • 示波表的應用——對于防爆公司來說，測試工具的精度至關重要
  • 指針萬用表的使用及注意事項
  • 信號分析中頻率跟蹤的實現
    		•
    河北赫磊液壓機械有限公司
    邢臺鴻多機械制造有限公司
    邢臺捷盛機械設備有限公司
    邢臺立業機械制造有限公司
    邢臺森雅特鋼木門有限公司
    邢臺市嘉禾冶金材料廠
    邢臺市金宏達儀表有限公司
    邢臺市凈美太陽能熱水器有限公司
    北方合金焊條有限公司
    北方泰澤特種焊接器材有限公司
    故城縣盛捷電光源材料有限公司
    官都石英砂廠
    涵博特種耐磨焊條有限公司
    航星模具廠
    和泰有色金屬有限公司
    河北澳龍電機科技有限公司
    河北晗旭焊接材料有限公司
    河北華億羊絨制品有限公司
    河北惠通水工機械股份有限公司
    河北佳昌線纜有限公司
    河北嘉輝合金爐料有限公司
    河北立世線纜有限公司
    河北聯泰液壓機械有限公司
    河北南宮 端星氣體機械有限公司
    河北昇順液壓機械有限公司
    河北省柏鄉縣翔宏金屬制品有限公司
    河北省臨西翔宇液壓無縫鋼管有限責任公司
    河北省南宮市華日焊條廠
    河北省南宮市慷泰氣體設備制造有限公司
    河北省新河縣梨園遠東電熱電器廠
    河北省鑫勝焊接材料有限公司
    河北勝豐液壓機械有限公司
    河北云科自動化設備有限公司
    河北長路制管有限公司
    建投邢臺熱電有限責任公司
    金門門業有限公司
    藍森吸塑模具廠
    臨西縣香通液壓機械有限公司
    南宮市輝騰電務器材廠
    南宮市聯興拋光材料有限公司
    南宮市僑聯特種焊接材料廠
    南宮市志超拋光材料制品有限公司
    寧晉縣晶星碳素有限公司
    寧晉縣聚泰電纜輔料加工廠
    寧晉縣宇新閥門有限公司
    平鄉配發水暖配件廠
    平鄉縣東電電器廠
    清河縣馳達密封件有限公司
    清河新科高溫耐火材料有限公司
    任縣朝興機械廠
    任縣鼎泰機械廠
    任縣豐達機械制造廠
    任縣豐壘太陽能電力科技有限公司
    任縣建明機械制造廠
    任縣銘誠機械廠
    任縣諾工機械制造廠
    任縣騰盛機械廠
    任縣翔天機械制造廠
    任縣兆豐機械廠
    沙河鼎立交通設施有限公司
    順達橡膠配件廠
    新明科技有限公司
    邢臺市科威商貿有限公司
    邢臺市明祥電氣設備有限公司
    邢臺市拓旺機械設備銷售有限公司
    邢臺速祥電機制造有限公司
    邢臺威達機械設備有限公司
    興盛電纜有限公司
    當前位置：首頁 > 邢臺儀器儀表 > 邢臺環境檢測儀器 > 邢臺紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    邢臺紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，紅外熱像儀成像，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.ghwl1688.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號