偷窥自拍第一页,国产精品第一,国产2021精品视频免费播放,狠狠五月深爱婷婷网免费

客戶榮譽
kehury
技術文章
  • 石嘴山紅外熱像儀 FLIR A310 ex
  • FLUKE 6100A 功率標準源
  • 渦流金屬測厚儀的原理
  • 不同溫度計的原理及種類
  • 臭氧老化試驗箱臭氧氣體發生及濃度控制方法
  • 正確使用露點儀及在測量中應注意的問題
  • TLA700系列邏輯分析儀的TLA7Axx捕獲模塊情況說明
  • 電導率儀基本常識
  • 布氏硬度計常見故障及解決方法分析
  • 頻譜分析儀與場強儀的區別
    		•
    寧夏石嘴山晨星發展有限公司
    寧夏石嘴山市惠農區昊天地副食商行
    寧夏石嘴山市隆泰興工貿有限公司
    寧夏石嘴山市星瀚市政產業集團公司
    寧夏石嘴山市應祥機械有限公司
    寧夏石嘴山市油老大植物油廠
    寧夏索非利亞食品有限公司
    寧夏偉寧食品有限公司
    寧夏文博工貿有限公司
    寧夏大海五谷雜糧保健食品公司
    寧夏大武口區賀蘭山石英砂廠
    寧夏丁大頭油脂有限公司
    寧夏東方鉭業股份有限公司-鈦材分公司
    寧夏亙峰商貿有限公司
    寧夏國能徐工新能源工程機械有限公司
    寧夏昊托電子衡器有限公司
    寧夏賀蘭山鐵合金有限公司
    寧夏華通建筑有限公司
    寧夏華陽活性炭有限公司
    寧夏惠農紅寶食品有限責任公司
    寧夏金海東泰思源煤化有限公司五分廠
    寧夏金海玉隆金屬制品有限公司
    寧夏金海玉隆實業有限公司
    寧夏金鎧電氣有限公司
    寧夏金晟利環保材料有限公司
    寧夏科盛除塵附件有限公司
    寧夏綠之源商貿有限責任公司
    寧夏煤業集團水電公司
    寧夏平羅禾盛達種業有限公司
    寧夏平羅隆韓鋅業有限公司
    寧夏平羅三陽實業有限公司
    寧夏平羅縣紅瑞制罐有限公司
    寧夏榮亨達特色農產品開發有限公司
    寧夏盛世杞源商貿有限公司
    寧夏石嘴山蟬向陽餐飲有限公司
    寧夏文順新型炭材制品有限公司
    寧夏西北煤礦機械有限責任公司
    寧夏西丹貿易有限公司
    寧夏西泰煤化工有限公司
    寧夏熙宇煤業有限公司
    寧夏夏綠脫水菜(集團)有限公司
    寧夏興鑫泉環保工程有限公司
    寧夏長青炭素有限公司
    平羅縣崇崗新惠達碳素制品廠
    平羅縣勁牛極力碳素制品有限公司
    平羅縣龍翔調味品有限公司
    平羅縣南方環保設備制造有限公司
    平羅縣鑫渝煤化工有限公司
    平羅縣豫平炭素有限公司
    平羅縣中一工貿有限公司
    石咀山市衛華工貿有限公司
    石嘴山市博城工貿有限公司
    石嘴山市創力緯機械加工廠
    石嘴山市鼎鑫盛公司有限公司
    石嘴山市昊源鍋爐按裝有限公司
    石嘴山市鴻鼎興業商貿有限公司
    石嘴山市機電設備有限公司
    石嘴山市吉勝機械加工有限公司
    石嘴山市聚匯機電設備有限公司
    石嘴山市聯眾商貿有限公司
    石嘴山市寧農農產品電子商務中心有限公司
    石嘴山市瑞福祥植物油有限公司
    石嘴山市瑞航實驗分析儀器有限公司
    石嘴山市森盛機械加工廠
    石嘴山市迎圣工貿有限公司
    石嘴山市宇智達工程機械有限公司
    萬祥達脫水菜有限公司
    遠航商貿有限責任公司
    中國西保集團寧夏豫平碳素有限公司
    中節投新材料投資有限公司
    中聯重科股份有限公司西北營銷公司
    中聯重科西北銷售大區寧夏寧北分公司
    當前位置：首頁 > 石嘴山儀器儀表 > 石嘴山環境檢測儀器 > 石嘴山紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    石嘴山紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，進口紅外熱像儀廠家，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.ghwl1688.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號