偷窥自拍第一页,国产精品第一,国产2021精品视频免费播放,狠狠五月深爱婷婷网免费

客戶榮譽
kehury
技術文章
  • 濟寧紅外熱像儀 FLIR A310 ex
  • 布氏硬度計準確測量的因素及排除方法
  • 紅外測溫儀原理及產品知識
  • 為什么使用滲漏檢測儀
  • 齒輪計量泵和隔膜計量泵比較
  • 紫外光老化試驗箱如何維修保養
  • 如何正確選購溫濕度測量儀表
  • 渦輪流量計檢定問題分析
  • 場強儀測量單位換算表
  • 水中溶氧檢測
    		•
    濟寧安特工程機械有限公司
    濟寧百利達進出口貿易有限公司
    濟寧東方模具制造有限公司
    濟寧風雅頌酒業有限公司
    濟寧富陸通機械設備有限公司
    濟寧富源機械有限公司
    濟寧高新區藍冰絲杠銷售部
    濟寧翰誠焊接技術有限公司
    濟寧恒昌機械設備有限公司
    濟寧恒嘉模板科技有限公司
    濟寧弘豐畜牧機械有限公司
    濟寧華勝食品有限公司
    濟寧惠生機械有限公司
    濟寧金鴿食品有限公司
    濟寧金屬構造維修公司
    濟寧錦泰焊接設備有限公司
    濟寧駿興機械設備有限公司
    濟寧力生數控設備有限公司
    濟寧林海造紙機械設備有限公司
    濟寧麥德麥食品有限公司德意小屋分公司
    濟寧麥德麥食品有限公司環城西路分公司
    濟寧潤澤輸送設備有限公司
    濟寧市百佳樂食品有限公司
    濟寧市大力工礦物資有限公司
    濟寧市鼎誠工礦工程設備有限公司
    濟寧市光屹機械設備有限公司
    濟寧市嘉運機械設備有限公司
    濟寧市茂松石化有限公司
    濟寧市美勝機械設備有限公司
    濟寧市品高食品有限公司
    濟寧市任城區甘諾寶力食品店
    濟寧市任城區禾味酥食品店
    濟寧市任城區美天萊食品店
    濟寧市任城區孟師傅早點鋪
    濟寧市任城區米奇堡漢堡店
    濟寧市任城區泉水茶莊
    濟寧市任城區瑞紅電機維修部
    濟寧市任城區陶班長的咖啡店
    濟寧市任城區祥發標準件銷售中心
    濟寧市任城區永心保健食品店
    濟寧市任城區玉金居調味品店
    濟寧市薩奧機械有限公司
    濟寧市山一重工機械有限公司
    濟寧市順源機械廠
    濟寧市順源機械設備有限公司工程機械分公司
    濟寧市順源機械設備有限公司礦山設備分公司
    濟寧市騰翼工程機械有限公司
    濟寧市鑫隆煤機廠
    濟寧市兗州區恩賜食品商店
    濟寧市兗州區海鮮源食品專柜
    濟寧市兗州區賈正遠早點店
    濟寧市兗州區淺啜茶葉銷售部
    濟寧市兗州區潤泉凈水設備有限公司
    濟寧市兗州區唐何水果店
    濟寧市兗州區天天鮮水果店
    濟寧市兗州區興隆莊鎮連柱農機維修部
    濟寧市兗州區張玉法農機維修部
    濟寧市兗州區正昊玻璃模具廠
    濟寧市昱松工程機械有限公司
    濟寧帥珍食品有限公司
    濟寧騰宇工程機械設備有限公司
    濟寧天順工程機械有限公司
    濟寧沃爾華集團有限公司
    濟寧鑫鵬數控設備有限公司
    濟寧宇泰混凝土有限公司
    濟寧宇越工礦機械設備有限公司
    濟寧原生食品有限公司
    濟寧運河緣食品有限公司汶上分公司
    濟寧長信工程機械有限公司
    濟寧中亞工程機械有限公司
    濟寧眾力電機車制造有限公司
    濟寧鑄美冶鑄材料設備有限公司
    嘉祥縣愛雯食品店
    嘉祥縣城區李春梅食品店
    嘉祥縣城區劉保軍調味品店
    嘉祥縣葛福瑞食品店
    嘉祥縣杰達農機維修部
    嘉祥縣金屯鎮芳雨食品商店
    嘉祥縣梁寶寺鎮安祥模具廠
    嘉祥縣隆力奇愛家食品店
    嘉祥縣馬集鎮琳琳食品商店
    嘉祥縣明富機械廠
    嘉祥縣鑫博副食品店、
    嘉祥縣秀麗食品店
    金鄉縣高河街道大俊水果部
    金鄉縣高河街道志法農機維修部
    金鄉縣晗利食品有限公司
    金鄉縣鴻通冷藏有限公司
    金鄉縣金鄉街道匯湘茶葉店
    金鄉縣金鄉街道老宋水果店
    金鄉縣金鄉街道沐陽水果店
    金鄉縣金鄉街道天合原冷庫
    金鄉縣金興經濟園力口偉水果店
    金鄉縣快易點食品科技有限公司
    金鄉縣馬廟鎮超強面粉批發部
    金鄉縣潤旺冷藏有限公司
    金鄉縣羊山鎮茶緣茶葉銷售店
    金鄉縣源泉石磨面粉有限公司
    當前位置：首頁 > 濟寧儀器儀表 > 濟寧環境檢測儀器 > 濟寧紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    濟寧紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，國產紅外熱像儀，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.ghwl1688.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號