濟寧安特工程機械有限公司
濟寧百利達進出口貿易有限公司 濟寧東方模具制造有限公司 濟寧風雅頌酒業有限公司 濟寧富陸通機械設備有限公司 濟寧富源機械有限公司 濟寧高新區藍冰絲杠銷售部 濟寧翰誠焊接技術有限公司 濟寧恒昌機械設備有限公司 濟寧恒嘉模板科技有限公司 濟寧弘豐畜牧機械有限公司 濟寧華勝食品有限公司 濟寧惠生機械有限公司 濟寧金鴿食品有限公司 濟寧金屬構造維修公司 濟寧錦泰焊接設備有限公司 濟寧駿興機械設備有限公司 濟寧力生數控設備有限公司 濟寧林海造紙機械設備有限公司 濟寧麥德麥?zhǔn)称酚邢薰镜乱庑∥莘止?br> 濟寧麥德麥?zhǔn)称酚邢薰经h(huán)城西路分公司 濟寧潤澤輸送設備有限公司 濟寧市百佳樂食品有限公司 濟寧市大力工礦物資有限公司 濟寧市鼎誠工礦工程設備有限公司 濟寧市光屹機械設備有限公司 濟寧市嘉運機械設備有限公司 濟寧市茂松石化有限公司 濟寧市美勝機械設備有限公司 濟寧市品高食品有限公司 濟寧市任城區甘諾寶力食品店 濟寧市任城區禾味酥食品店 濟寧市任城區美天萊食品店 濟寧市任城區孟師傅早點鋪 濟寧市任城區米奇堡漢堡店 濟寧市任城區泉水茶莊 濟寧市任城區瑞紅電機維修部 濟寧市任城區陶班長的咖啡店 濟寧市任城區祥發標準件銷售中心 濟寧市任城區永心保健食品店 濟寧市任城區玉金居調味品店 濟寧市薩奧機械有限公司 濟寧市山一重工機械有限公司 濟寧市順源機械廠 濟寧市順源機械設備有限公司工程機械分公司 濟寧市順源機械設備有限公司礦山設備分公司 濟寧市騰翼工程機械有限公司 濟寧市鑫隆煤機廠 濟寧市兗州區恩賜食品商店 濟寧市兗州區海鮮源食品專柜 濟寧市兗州區賈正遠早點店 濟寧市兗州區淺啜茶葉銷售部 濟寧市兗州區潤泉凈水設備有限公司 濟寧市兗州區唐何水果店 濟寧市兗州區天天鮮水果店 濟寧市兗州區興隆莊鎮連柱農機維修部 濟寧市兗州區張玉法農機維修部 濟寧市兗州區正昊玻璃模具廠 濟寧市昱松工程機械有限公司 濟寧帥珍食品有限公司 濟寧騰宇工程機械設備有限公司 濟寧天順工程機械有限公司 濟寧沃爾華集團有限公司 濟寧鑫鵬數控設備有限公司 濟寧宇泰混凝土有限公司 濟寧宇越工礦機械設備有限公司 濟寧原生食品有限公司 濟寧運河緣食品有限公司汶上分公司 濟寧長信工程機械有限公司 濟寧中亞工程機械有限公司 濟寧眾力電機車制造有限公司 濟寧鑄美冶鑄材料設備有限公司 嘉祥縣愛雯食品店 嘉祥縣城區李春梅食品店 嘉祥縣城區劉保軍調味品店 嘉祥縣葛福瑞食品店 嘉祥縣杰達農機維修部 嘉祥縣金屯鎮芳雨食品商店 嘉祥縣梁寶寺鎮安祥模具廠 嘉祥縣隆力奇愛家食品店 嘉祥縣馬集鎮琳琳食品商店 嘉祥縣明富機械廠 嘉祥縣鑫博副食品店、 嘉祥縣秀麗食品店 金鄉縣高河街道大俊水果部 金鄉縣高河街道志法農機維修部 金鄉縣晗利食品有限公司 金鄉縣鴻通冷藏有限公司 金鄉縣金鄉街道匯湘茶葉店 金鄉縣金鄉街道老宋水果店 金鄉縣金鄉街道沐陽水果店 金鄉縣金鄉街道天合原冷庫 金鄉縣金興經濟園力口偉水果店 金鄉縣快易點食品科技有限公司 金鄉縣馬廟鎮超強面粉批發部 金鄉縣潤旺冷藏有限公司 金鄉縣羊山鎮茶緣茶葉銷售店 金鄉縣源泉石磨面粉有限公司 |
A powerful, complete hydraulic pressure calibration system to cover a wide workload Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include: · No weights to load and unload, transport or send out for calibration · Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature · No piston-cylinder changes · No significant sensitivity to level or vibration · Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration · Operates in any unit of measure, switching easily from one unit to the next The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers. The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi). The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface. RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly. The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi). The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available. High performance calibration made simple Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box. · Pressure ranges available to 200 MPa (30,000 psi) · ± 0.02 % of reading total one-year accuracy, 0.025 % for two years · Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort · Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation · Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 · Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium · AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment · Optional foot switch accessory allows hands-free data collection when running AutoTests · Rechargeable battery pack and transport case options for field operation
·
·
1. Combined linearity, hysteresis, and
repeatability. Precision does not include stability or calibration reference
uncertainty.
通用配件:
，，
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
       |
| 地址：青島市嶗山區海爾路29號溫哥華花園5-1-401 電話：0532-86069117 83812497 83821263 傳真：0532-88786387 網址：www.ghwl1688.com 青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號 
|
 |