偷窥自拍第一页,国产精品第一,国产2021精品视频免费播放,狠狠五月深爱婷婷网免费

客戶榮譽
kehury
技術文章
  • 大連E-DWT Electronic Deadweight Tester Kits 6531 and 6532
  • 冷鏡式露點儀基本原理
  • 輻射對人體的影響
  • 影響電子天平稱量的因素
  • 煙氣分析儀的常見問題(二)
  • 什么是絕緣電阻測試儀
  • 臺式萬用表在壓力傳感器領域應用
  • 邵氏硬度計使用說明
  • 度量衡單位換算表
  • 萬用表校準的原理
  • 大連愛德摩設備制造有限公司
    大連愛利斯智能裝備有限公司
    大連愛斯特橡膠化工有限公司
    大連安質金屬網業有限公司
    大連百歐特動力設備有限公司
    大連北方環海機床有限公司
    大連北科福祚科技發展有限公司
    大連北冶液壓油缸有限公司
    大連冰河世紀制冷設備有限公司
    大連博眾工程機械有限公司
    大連草野商貿有限公司
    大連超達光電精密儀器有限公司
    大連超洋機械設備有限公司
    大連誠達冷庫
    大連承天自動化焊接切割設備有限公司
    大連崇義機電設備有限公司
    大連川九重工有限公司
    大連船鑫鍛壓有限公司
    大連創新洪源機械有限公司
    大連春光科技發展有限公司
    大連椿藤機電設備有現公司
    大連浱泉潔水器材服務有限公司
    大連大玻玻璃有限公司
    大連大鑫建筑工程設備租賃有限公司
    大連大友高技術陶瓷有限公司
    大連當時機械有限公司
    大連德歐液壓氣動商行
    大連帝威普貿易有限公司
    大連蒂奧工業用品有限公司
    大連巔峰輸送帶有限公司
    大連電機集團大連電機廠
    大連電子城泰和鼎鑫科技商行
    大連鼎桐自動化設備公司
    大連鼎桐自動化設備有限公司
    大連鼎桐自動化設備有限責任公司
    大連東宏重工機械有限公司
    大連東金龍金屬制造有限公司
    大連方騰商貿有限公司
    大連飛宇緊固件有限公司
    大連峰陽機械有限公司
    大連鋒隆機械有限公司
    大連富士達電器有限公司
    大連富遠工業有限公司
    大連高琪機電設備有限公司
    大連高松浦奇商事有限公司
    大連格爾斯清潔燃料有限公司
    大連耕古模具技術有限公司
    大連廣亞機電有限公司
    大連國電北方測控技術公司
    大連海濱耐酸泵有限公司
    大連漢諾威機械設備有限公司
    大連漢威刀劍制造有限公司
    大連豪特麥羅機械技術有限公司
    大連恒馳機械設備有限公司
    大連恒新科技有限公司
    大連衡瑞智能科技開發有限公司
    大連弘寶工程機械有限公司
    大連弘都貿易有限公司
    大連弘英機電設備有限公司
    大連弘澤電器有限公司
    大連宏運昌盛機械化工程有限公司
    大連鴻鼎熱能技術有限公司
    大連厚德機械加工廠
    大連華氏流體設備有限公司銷售公司
    大連華爍石化設備有限公司
    大連華御科技發展有限公司
    大連驊洋液力偶合器有限公司
    大連匯洪精密機械有限公司
    大連匯鑫洗滌機械
    大連機床(數控)股份有限公司
    大連吉海金屬制品有限公司
    大連佳浩空調設備有限公司
    大連佳仁國際貿易有限公司
    大連嘉豪鑄工有限公司
    大連嘉和實業貿易有限公司
    大連嘉泰盛自動化科技有限公司
    大連尖峰軸承制造有限公司
    大連驕子激光技術有限公司
    大連驕子兄弟激光設備有限公司
    大連捷勝電磁技術有限公司
    大連金發機電工程有限公司
    大連金工公司
    大連金山風動機械有限公司
    大連金思奇數控裝備有限公司
    大連金引擎潤滑油有限公司
    大連金州區鐵馬熱處理廠
    大連金州新區先進街道東興機械設備維修廠
    大連金州新區鑫弘業機械加工廠
    大連經濟技術開發區德翔機械設備經營部
    大連經濟技術開發區將臣商貿有限公司
    大連經濟技術開發區金澤物質商行
    大連經濟技術開發區群安精密模具廠
    大連經濟技術開發區天寶源五金機電商行
    大連經濟技術開發區一佳科技有限公司
    大連精工益流體設備有限公司
    大連九州化工機械制造有限公司
    大連巨威機場設備有限公司
    大連炬龍
    大連聚源機械設備有限公司
    大連軍良科技發展公司
    大連駿利達工業品有限公司
    大連凱恩特科技有限公司
    大連凱世泰建材有限公司
    大連凱尊工業有限公司
    大連康洛斯結晶器有限公司
    大連科帝自動化設備有限責任公司
    大連科環泵業有限公司
    大連科沃自動化技術有限公司
    大連科新環宇機械有限公司
    大連闊德機械設備有限公司
    大連萊福斯特實驗室設備有限公司
    大連力報士潤滑油(大連)有限公司
    大連利盛測控技術有限公司
    大連聯合工業泵有限公司
    大連聯晟機械制造有限公司
    大連零序科技有限公司
    大連流體控制技術有限公司
    大連龍?jiān)唇?jīng)貿有限公司
    大連隆源貿易有限公司
    大連路德機電有限公司
    大連羅斯泵業有限公司
    大連旅順富達減速機廠
    大連美萊達科技-有限公司
    大連美汀密封工業有限公司
    大連美葶貿易有限公司
    大連夢之手電器有限公司
    大連密科隆精密機械有限公司
    大連明煒物資有限公司
    大連摩通科技有限公司
    大連耐德風機電設備有限公司
    大連品冠環保包裝科技有限公司
    大連普曼傳動設備有限公司
    大連普灣新區同利農機商行
    大連奇力速貿易商行
    大連啟臣機械有限公司
    大連啟騰機械設備銷售有限公司
    大連乾峰焊接工程有限公司
    大連日川精密模具部品有限公司
    大連日牽電機有限公司電機公司
    大連日鑫特刀具有限公司--百豐店
    大連榮聲工貿廚房設備有限公司
    大連榮昱盛臺灣亞德客ATC山耐斯氣動液壓件白鋼螺絲私營有限公司
    大連榮元精密機械有限公司
    大連瑞豐澤科技有限公司
    大連瑞盤海德裝備制造有限公司
    大連三齊機械有限公司
    大連山泰裝飾混凝土制品有限公司
    大連申域流體機械有限公司
    大連神通拉面機械有限公司
    大連沈通線纜電力物資有限公司
    大連生輝機械科技有限公司
    大連圣鼎熱力機電有限公司
    大連勝航機電設備有限公司
    大連勝欣建筑電氣有限公司
    大連晟翔科技發展有限公司
    大連盛博電纜橋架廠
    大連盛大油氣設備有限公司
    大連世亞集團公司
    大連市大李家正水產養殖加工廠
    大連市大連思普銳思金屬制品有限公司
    大連市甘井子區華北路辛亥電動工具批發商行
    大連市甘井子區泉水街道宏盛機電產品商行
    大連市金州區寶麗密封五金機電商行
    大連市金州區高峰裝載機配件商行
    大連市金州區漢普機械加工廠
    大連市金州區永吉木制品商行
    大連市金州區卓爾風煙工程設備商行
    大連市林海巖土鉆探有限公司
    大連市旅順口區宏峰屏蔽電泵廠
    大連市旅順口區銀豐物資商行
    大連市沙河口區開和電氣商行
    大連市雙興綜合批發市場國杰干海鮮行
    大連市雙興綜合批發市場隆福祥商行
    大連市雙興綜合批發市場深海島海參商行
    大連市西崗區鑫輝經貿商行
    大連市英麗電子商務有限公司
    大連首科自控科技有限公司
    大連雙瑞科技有限公司
    大連水國燃燒設備有限公司
    大連順鑫機電設備有限公司
    大連順鑫鐵藝白鋼工程有限公司
    大連唐仁電器商行
    大連天邦膜技術國家工程研究中心有限責任公司
    大連天堃電熱地暖工程有限公司
    大連天龍石化泵業有限公司
    大連天禧機電設備有限公司
    大連通用風機廠
    大連萬邦機械有限公司
    大連萬碩軸承有限公司
    大連唯恩測控技術有限公司
    大連維多瑪信息科技有限公司
    大連偉業新源科技有限公司
    大連五洲海水泵業有限公司
    大連西麥克進出口有限公司
    大連西斯那提機床設備有限公司
    大連限偶液力偶合器有限公司
    大連祥豐石化裝備有限公司
    大連欣佱五金機電商行
    大連欣榮科技有限公司
    大連新東方隆昌建設工程有限公司
    大連新佳維數控技術有限公司
    大連新力鐵機車裝備有限公司
    大連新起點電子有限公司
    大連新思路電子有限公司
    大連新重集團進出口有限公司
    大連鑫成冷庫
    大連鑫古城合金工具有限公司
    大連鑫瑋貿易有限公司
    大連鑫毅鋼磨料配件機械設備有限公司
    大連鑫宇科技有限公司
    大連信豐貿易有限公司
    大連星燦機械有限公司
    大連幸福家居世界眾遠裝飾材料商行
    大連亞信機電技術開發有限公司
    大連研華泵業有限公司
    大連一北工業科技有限公司
    大連億冠機械制造有限公司
    大連屹隆凈化設備有限公司
    大連易豐商貿有限公司
    大連易麗成機械制造有限公司
    大連銀港節能科技有限公司
    大連英弗斯熱能科技股份有限公司
    大連英林機械制造有限公司
    大連英勇精工機械有限公司
    大連永德隆管道設備有限公司
    大連永信科技發展有限公司
    大連有賀精密模具有限公司
    大連御廣貿易有限公司
    大連元利流體技術有限公司
    大連云淼科技有限公司
    大連澤爾特流體設備有限公司
    大連長城稀硫酸泵廠
    大連長興島辦事處徳柰福洗衣店
    大連兆源硬質合金廠
    大連智成科技有限公司
    大連中洋混凝土有限公司
    大連中冶重工機械有限公司
    大連重通機械制造有限公司
    大連住友冶金機械廠
    大連紫微星科技有限公司
    當前位置:首頁 > 大連儀器儀表 > 大連電子電工 > 大連計量校準
    E-DWT Electronic Deadweight Tester Kits
    型 號:6531 and 6532
    品 牌:美國FLUKE
    技術指標:To RPM4-E-DWT:12 V dc 1.2 A
    大連E-DWT Electronic Deadweight Tester Kits-6531 and 6532-美國FLUKE

    A powerful, complete hydraulic pressure calibration system to cover a wide workload

    Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include:

    ·         No weights to load and unload, transport or send out for calibration

    ·         Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature

    ·         No piston-cylinder changes

    ·         No significant sensitivity to level or vibration

    ·         Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration

    ·         Operates in any unit of measure, switching easily from one unit to the next

     The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers.

    The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers.

    The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi).

    The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface.

    RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly.

    The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi).

    The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available.

    High performance calibration made simple

    Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box.

    ·         Pressure ranges available to 200 MPa (30,000 psi)

    ·         ± 0.02 % of reading total one-year accuracy, 0.025 % for two years

    ·         Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort

    ·         Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation

    ·         Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 

    ·         Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium

    ·         AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment

    ·         Optional foot switch accessory allows hands-free data collection when running AutoTests

    ·         Rechargeable battery pack and transport case options for field operation

    General

    Power requirements

    To RPM4-E-DWT:

    12 V dc 1.2 A

    To AC to DC power supply:

    100 V ac to 240 V ac, 50/60 Hz

    Temperature range

    Storage:

    - 20 °C to 70 °C

    Operating:

    10 °C to 40 °C

    Relative Humidity

    Storage:

    0 % to 100 %

    Operating:

    0 % to 70 %

    Weight

    1 Q-RPT:

    12 kg (26 lb) approximate

    2 Q-RPT:

    14 kg (30 lb) approximate

    Dimensions

    E-DWT footprint:

    41.4 cm W x 37.1 cm D (16.3 in x 14.6 in)

    E-DWT height:

    26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height

    Pressure range

    Up to 200 MPa (30k psi), depending on configuration

    Operating medium

    All 6531 and 6532 E-DWT Kits are shipped dry, standard preparation. Can be filled with di-ethyl-hexyl sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol and distilled water or mineral oil.

    Reservoir capacity

    300 cc (18 in3)

    Variable volume displacement

    3 cc (0.18 in3), 200 MPa (30,000 psi) maximum

    Filling and priming pump displacement

    3.7 cc (0.23 in3)

    TEST pressure connection

    DH500 female, 200 MPa (30k psi) maximum working pressure. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5. Adapter maximum working pressure is 140 MPa (20k psi). Note: DH500 is a gland and collar type fitting for 6 mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C, HIP HF4, 9/16-18 UNF, etc.

    Pressure Limits

    Maximum Working Pressure:

    Range of RPM4-E-DWT monitor’s Hi Q-RPT

    Maximum priming pump pressure:

    700 kPa (100 psi)

    Maximum Working Pressure:

    with Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT

    Communication ports:

    RS-232 (COM1, COM2)

    ·

    Pressure measurement

    Warm up time

    15 minute temperature stabilization recommended from cold power up

    Normal Operating Temperature Range

    10 °C to 40 °C (50 °F to 104 °F)

    Resolution

    Default: 0.01 % of active range
    User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange, whichever is larger

    Precision1

    ± 0.018 % of reading or 0.0018 % of Q-RPT span, whichever is greater

    Predicted Stability2

    One year:

    ± 0.0075 % of reading

    Two year:

    ± 0.015 % of reading

    Measurement Uncertainty3

    One year:

    ± 0.02 % of reading or 0.002 % of Q-RPT span, whichever is greater

    Two year:

    ± 0.025 % of reading or 0.0025 % of Q-RPT span, whichever is greater

    ·         1. Combined linearity, hysteresis, and repeatability. Precision does not include stability or calibration reference uncertainty.
    2. Predicted Q-RPT measurement stability limit (k=2) assuming regular use of AutoZero function and short term stability between rezeroing.
    3. Maximum deviation of the Q-RPT indication from the true value of applied pressure including precision, predicted stability with rezeroing, temperature effect from 10 oC to 40 oC and calibration uncertainty (assumes calibration reference uncertainty of ±0.005 % of reading, k=2), combined and expanded (k=2) following the ISO “Guide to the Expression of Uncertainty in Measurement.

    型號

    描述

    6531-7M

    E-DWT-H A7M, 0.7 to 7 MPa, 100 to 1,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-14M

    E-DWT-H A14M, 1.4 to 14 MPa, 200 to 2,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-20M

    E-DWT-H A20M, 2 to 20 MPa, 300 to 3,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-40M

    E-DWT-H A40M, 4 to 40 MPa, 600 to 6,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-70M

    E-DWT-H A70M, 7 to 70 MPa, 1,000 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-140M

    E-DWT-H A140M, 14 to 140 MPa, 2,000 to 20,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6531-200M

    E-DWT-H A200M, 20 to 200 MPa, 3,000 to 30,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-70M

    E-DWT-H A70M/A7M, 0.7 to 70 MPa, 100 to 10,000 psi

    Includes:

    ·         E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-140M

    E-DWT-H A140M/A14M, 1.4 to 140 MPa, 200 to 20,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    6532-200M

    E-DWT-H A200M/A20M, 2 to 200 MPa, 300 to 30,000 psi

    Includes:

    ·        E-DWT-H Electronic Deadweight Tester with power supply and operating manual

    ·        Vacuum liquid fill kit

    ·        Test station quick-mount fitting

    ·        NPT adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        BSP adapters: 1/8 in, 1/4 in, 3/8 in and 1/2 in

    ·        Metric adapters: M20 x 1.5 and M14 x 1.5

    通用配件:


    配件

    描述

    Case

    加固且可重復使用的模制裝運外殼(部件號3338097)

    電池組/充電器

    帶有充電器的12 VDC電池(部件號3071049)

    腳踏開關

    遠程[ENTER]腳踏開關(部件號3070940)

    COMPASS for Pressure

    自動執行測試、數據采集、報告與設備資產管理的軟件

     

    ,,
    同類產品
    地址:青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話:0532-86069117 83812497 83821263
    傳真:0532-88786387 網址:www.ghwl1688.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號